KUFU makes a no-drill drawer kit for the INEOS Grenadier Quartermaster pickup. The platform bolts into the truck bed’s factory threaded mounting points. You can start with one 55-inch drawer and keep the other side open for a fridge, dog kennel, or bulky gear, or run two drawers for a level cargo surface.

What bolts into the bed?

The powder-coated steel platform uses front-to-back rails and cross rails with integrated Catch-and-Click™ mounts. Assemble the rails with the supplied rivets and a hand riveter, then bolt the assembled platform into the factory mounting points. The drawers click into the platform and can be released when you need the space back. If the bed has a spray-in liner, check that the threaded mounting points are accessible before installation.

Which layout makes sense for your truck?

• One drawer: Start with the 11-inch single kit if you want a place for tools or recovery gear and room beside it for a low fridge slide. The 7-inch kit gives you a lower surface. The 18-inch kit gives you more vertical storage.
• Twin drawers: The twin 11-inch kit creates a level surface across the tops of the two drawers for gear you want to reach without opening a drawer. Measure the cargo footprint and plan how you’ll secure it.
• Mixed heights: A 7-inch and 18-inch pair gives you one low surface and one deeper drawer for bulkier items. Check the height under your tonneau or topper with any gear you plan to carry on top.

Can I keep the factory spare in the bed?

Check the tire’s sidewall clearance and the space you need to lift the wheel off its mount and out of the bed. Tire size, sidewall profile, drawer position, and topper opening all affect access. A spare can sit in the bed and still be difficult to remove. See how one owner handled an oversized spare in his Quartermaster twin-drawer build.

Is there a DECKED kit for the Quartermaster?

DECKED’s published fitment guide does not list the Quartermaster. If you’ve used DECKED in a previous truck and want lockable bed storage again, KUFU offers Quartermaster-specific single and twin kits that mount to the factory bed points. See DECKED’s fitment guide.

U.S. shipping and platform lead time

Availability: Drawer units ship from U.S. stock when available. The Quartermaster bolt-in platform will be shipped separately from our Australian warehouse via air mail. Lead time is approximately 2 weeks for the platform.  Drawers are in stock in the USA and will ship freight within a few days of your order.  Contact us if you have any questions or a tight schedule you'd like to discuss. 

Shop Quartermaster drawer kits

Want help choosing a layout? Send us a tailgate-open photo showing the bed floor and spare, along with your tire size, fridge or topper model if applicable, and ZIP code.